Flammadur E292 is a two component polyurethane resin which is used to seal through mechanical parts in penetrations to protect them from fire within the penetration.
Properties:
Flammadur E292 is flexible flame retardant which has excellent resistance to water, contains no asbestos or harmful solvents. Avoid contact with bare skin and eyes, for details, please consult Material Safety Data Sheet.
Non Toxic:
Contains no asbestos or harmful solvents. Avoid contact with bare skin and eyes.
Instructions:
The hardener is contained in a small chamber that is effectively the lid of the main container. Remove the plastic cap in the lid with a screwdriver or similar tool, and puncture the base of the lid. Its contents, the hardener, will drain into the resin in the container. Remove the metal clamp and the lid from the container. Stir the compound until the mixture reaches an even color indicating that the mixture is homogeneous. Do not leave any of the resin in the bottom of the container. After the resin and the hardner have been weel mixed, use immediately. Tools and spills must be cleaned with an organic solvent. Apply the mixture by pouring directly from the can or with the aid of a hand pump. No special equipment is needed. Do not apply below 5ºC (41ºF).
Spraying:
Special spraying equipment can be used to spray a mixture of 7.25 parts resin to one part of hardener. Application on ships in Geaquello System for passage through bulkheads and decks: For cables E292 is used on a deck, on the top of E950 for a depth of 10 mm (see Fig. 3b in Geaquello System, under heading of Transit Box) For electric busway in Geaquello System, under heading Electric Busway, for a depth of 110 mm
e-mail
Türkçe
English
